DEERMA CM800 Dust Mite Removal Vacuum Cleaner – Powerful 13kPa Suction with UV-C, HEPA Filtration & 50°C Warm Air

4,890.00৳ 

Description

DEERMA CM800 Dust Mite Removal Vacuum Cleaner – Powerful Deep Cleaning for Mattresses, Sofas & Bedding

Advanced Cleaning for Fabrics, Bedding and Upholstery

The DEERMA CM800 Dust Mite Removal Vacuum Cleaner is a specialized handheld cleaning device designed for mattresses, bedding, sofas, pillows, and other suitable fabric surfaces. It combines four cleaning approaches—UV-C light, warm air, high-frequency beating, and powerful vacuum suction—to help remove dust, debris, and dust mites from fabric surfaces. DEERMA lists a maximum vacuum of 13kPa, a 50°C constant-temperature hot-air function, and 7,000 beats per minute of beating action.

For homes in Bangladesh, mattresses, pillows, blankets, sofas, and upholstered furniture can collect dust and moisture over time. The DEERMA CM800 Dust Mite Removal Vacuum Cleaner provides a convenient way to give these surfaces more focused cleaning than a conventional floor vacuum, while its HEPA filtration system helps capture fine particles collected during vacuuming.

Common Problems with Mattresses & Upholstered Surfaces

Fabric surfaces can be difficult to clean thoroughly with ordinary household tools:

  • 🛏️ Dust Inside Fabrics: Dust and small particles can become embedded deep within mattresses and upholstery.
  • 🐜 Dust Mite Build-Up: Bedding can provide an environment where dust mites may accumulate.
  • 💧 Dampness: Moisture can remain inside bedding and upholstered surfaces.
  • 🧹 Surface-Only Cleaning: Ordinary dusting may not reach particles inside fabric layers.
  • 🛋️ Difficult Sofa Cleaning: Large sofas and upholstered furniture can be challenging to clean with conventional equipment.
  • 🌬️ Fine Particle Recirculation: Poor filtration can allow collected fine dust to escape back into the surrounding environment.
  • 🔦 Limited Specialized Cleaning: Standard vacuums may not combine beating, UV-C treatment, warm air, and targeted suction.

Smart Solution: DEERMA CM800 Dust Mite Removal Vacuum Cleaner

The DEERMA CM800 Dust Mite Removal Vacuum Cleaner is designed specifically around fabric and bedding cleaning. Its combination of light, heat, beating, and vacuuming works as a multi-stage cleaning approach: the vibration helps loosen particles, the suction removes them, the warm air helps reduce dampness, and the UV-C lamp provides surface treatment when properly positioned.

The device uses a 450W motor and provides at least 13kPa maximum vacuum power according to the product manual. Its wide cleaning head and specialized functions make it suitable for mattresses, pillows, blankets, sofas, and other appropriate indoor fabric surfaces.

The DEERMA CM800 is also designed with pressure-sensitive UV-C safety protection. According to DEERMA, the UV light automatically switches off when the device is lifted more than 5cm from the mattress, helping prevent direct exposure.

Key Features of DEERMA CM800 Dust Mite Removal Vacuum Cleaner

🛡️ 13kPa Powerful Suction

The DEERMA CM800 delivers at least 13kPa vacuum power, providing strong suction for removing dust, debris, and loosened particles from fabric surfaces. This focused suction is designed for mattresses, bedding, sofas, and upholstery rather than general floor cleaning.

🛡️ 253.7nm UV-C Light

The CM800 features an extended UV lamp that emits 253.7nm ultraviolet light. DEERMA describes this as part of its mite-removal system, with the UV function operating when the cleaner is appropriately positioned on the surface.

🛡️ 50°C Constant Warm Air

The warm-air outlet produces approximately 50°C constant-temperature air. This helps reduce dampness in bedding and fabric surfaces while supporting the product’s overall mite-removal cleaning process.

🛡️ 7,000 Beats per Minute

The CM800 uses high-frequency beating to shake loose particles from fabric layers before vacuuming them away. DEERMA’s official product page specifies 7,000 beats per minute for this function.

🛡️ HEPA & Dual Filtration

The CM800 uses a dual filtration system, combining spiral-wind separation with a HEPA filter. This filtration system is designed to capture fine particles and reduce the amount of collected dust returning to the surrounding environment.

🛡️ Pressure-Sensitive UV Safety

The UV-C system includes pressure-sensitive protection. When the cleaner is lifted away from the surface, the UV light is designed to switch off automatically, reducing the risk of direct UV exposure.

🛡️ Ergonomic Fish-Tail Handle

The curved, bionic fish-tail-shaped handle is designed to provide a more comfortable grip during extended cleaning. Its ergonomic shape helps make one-handed operation easier when moving the device across mattresses and upholstery.

🛡️ One-Key Operation

The DEERMA CM800 uses a straightforward one-key start design, making it easy to begin a cleaning session without complicated controls.

Benefits You’ll Enjoy

  • 13kPa Powerful Suction – Helps remove dust and loosened particles from fabric surfaces.
  • Four-Way Cleaning Approach – Combines UV-C, warm air, beating, and vacuuming.
  • Effective Deep-Fabric Cleaning – Designed for mattresses, sofas, pillows, blankets, and upholstery.
  • HEPA Filtration – Helps capture fine particles during vacuuming.
  • 50°C Warm Air – Helps reduce moisture and dampness in bedding.
  • High-Frequency Beating – 7,000 beats per minute helps loosen embedded particles.
  • UV-C Treatment – Adds a specialized light-based cleaning function.
  • Ergonomic Handle – Comfortable to hold during repeated cleaning.
  • Wide Cleaning Area – Helps cover fabric surfaces efficiently.
  • Easy One-Key Operation – Simple control for everyday use.

Perfect For

  • 🛏️ Mattress Cleaning – Give mattresses focused cleaning beyond regular surface dusting.
  • 💤 Pillow Cleaning – Maintain suitable fabric pillows with targeted vacuuming.
  • 🛋️ Sofa Cleaning – Clean upholstered sofa surfaces and cushions.
  • 🧺 Blanket Cleaning – Use on suitable fabric bedding surfaces.
  • 🧸 Fabric & Upholstered Items – Useful for appropriate soft furnishings.
  • 🏠 Home Cleaning – Ideal for regular indoor fabric maintenance.
  • 👶 Nursery & Bedding Areas – Suitable for cleaning appropriate fabric surfaces.
  • 🐶 Pet Homes – Helps collect dust, hair, and debris from suitable upholstery.
  • 🛋️ Upholstered Furniture – Designed for sofas and other fabric-covered furniture.
  • 🌙 Routine Bedding Maintenance – A practical tool for regular mattress and bedding cleaning.

Why Choose the DEERMA CM800 Dust Mite Removal Vacuum Cleaner?

The DEERMA CM800 Dust Mite Removal Vacuum Cleaner is different from a conventional handheld vacuum because it is specifically designed around the challenges of fabric and bedding cleaning. Instead of relying only on suction, it combines beating, vacuuming, warm air, and UV-C light as part of its cleaning system.

Its 13kPa suction power helps collect dust and particles loosened from fabric surfaces. The high-frequency beating action works before and alongside vacuuming to help dislodge material that may be embedded deeper within mattresses and upholstery.

The warm-air function adds another useful capability. At approximately 50°C, it helps reduce dampness in bedding and fabric surfaces, which can be particularly useful when maintaining mattresses and other household upholstery.

The combination of HEPA filtration and UV-C safety protection further distinguishes the CM800. It is a specialized cleaning appliance for people who want a more targeted solution for bedding, mattresses, sofas, and other suitable fabric surfaces.

DEERMA CM800 vs Ordinary Vacuum Cleaner

Feature DEERMA CM800 Dust Mite Vacuum Ordinary Vacuum Cleaner
Suction Power ≥13kPa Varies
Primary Purpose Mattresses & Upholstery General Cleaning
UV-C Light Yes Usually No
Warm Air 50°C Usually No
Beating Function 7,000 beats/min Usually No
HEPA Filtration Yes Varies
Dust Mite Focus Yes General
Ergonomic Handheld Design Yes Varies
UV Safety Sensor Yes Usually No
Power 450W Varies
Best Use Beds, Sofas, Pillows & Fabric Floors & General Surfaces

The CM800’s specialized features and specifications are based on DEERMA’s product information and product manual.

Special Product Function: Four-Step Dust Mite Removal System

The standout feature of the DEERMA CM800 is its integrated four-step approach to fabric cleaning:

1. UV-C Light 🔦

The 253.7nm UV-C lamp provides the product’s light-based treatment function. The lamp is designed to operate when the cleaner is positioned correctly on the surface.

2. 50°C Warm Air 🌡️

The warm-air outlet produces constant-temperature air at approximately 50°C. This helps reduce moisture and dampness in suitable bedding and fabric surfaces.

3. High-Frequency Beating 🛏️

The beating mechanism operates at 7,000 beats per minute, helping shake loose dust mites, dust, and other particles from fabric layers.

4. Powerful Vacuuming 💨

The 13kPa suction system then helps collect the loosened particles and debris. Combined with the filtration system, this creates a focused cleaning process for bedding and upholstery.

How to Use the DEERMA CM800 Dust Mite Removal Vacuum Cleaner

  1. Connect the Power: The CM800 is a corded appliance, so connect it to a suitable 220–240V power source.
  2. Place It on the Surface: Position the cleaning head directly against the mattress, pillow, sofa, or other suitable fabric surface.
  3. Start the Device: Use the one-key control to begin operation.
  4. Move Slowly Across the Surface: Move the cleaner steadily across the fabric so the beating, UV-C, warm air, and suction functions can work together.
  5. Focus on Problem Areas: Spend additional time on mattresses, seams, cushions, and other areas where dust can accumulate.
  6. Clean the Dust System: After use, switch off and unplug the device, then empty and maintain the dust and filtration components according to the instructions.

The product manual specifies indoor use and instructs users to unplug the device after operation.

Important Usage Tips

  • ⚠️ Keep the UV-C lamp in contact with the intended surface so the pressure-sensitive safety system can operate correctly.
  • 🚫 Do not look directly at the UV-C lamp or intentionally expose skin or eyes to UV-C light.
  • 🔌 Unplug the appliance after use and before maintenance.
  • 💧 Do not use the appliance to vacuum liquids unless the manufacturer specifically states otherwise.
  • 🧹 Clean the filter regularly to maintain suitable airflow and suction performance.
  • 🗑️ Empty the dust container when needed rather than allowing excessive accumulation.
  • 🌡️ Be aware of the warm-air outlet during and immediately after operation.
  • 🏠 Use the CM800 indoors as instructed by the manufacturer.
  • 📦 Store the device in a clean, dry location after use.

Product Specifications

Specification Details
Brand Xiaomi DEERMA
Model CM800
Product Type Dust Mite Removal Vacuum Cleaner
Rated Power 450W
Rated Voltage/Frequency 220–240V~ 50/60Hz
Suction Power ≥13kPa
UV-C Wavelength 253.7nm
Warm Air Temperature 50°C Constant Temperature
Beating Frequency 7,000 beats/min
Filtration Spiral Wind Separation + HEPA
Operation Corded
Dust Container Varies by market/listing; check supplied unit
Dimensions Approx. 355 × 230 × 165mm
Product Weight Approx. 1.45kg
Handle Design Ergonomic Curved/Fish-Tail Handle
Recommended Use Mattress, Bed, Sofa, Pillow, Blanket & Upholstery
Safety Feature Pressure-Sensitive UV-C Shutoff
Package Main Unit, Small Brush, User Manual

DEERMA’s official page lists 355 × 230 × 165mm dimensions and approximately 1.45kg weight, while its manual specifies 450W power, 220–240V operation, and ≥13kPa maximum vacuum. Some third-party listings report different dust-container capacities and dimensions, so the exact supplied unit should be checked before publishing a capacity claim.

Why Buy from AIYOZON?

When you buy the DEERMA CM800 Dust Mite Removal Vacuum Cleaner from AIYOZON, you can enjoy:

  • Quality Products
  • 🚚 Fast Delivery Across Bangladesh
  • 📦 Secure Packaging
  • 💬 Responsive Customer Support
  • 🛒 Convenient Online Shopping
  • 💰 Great Value for Money

AIYOZON makes it convenient to shop for practical DEERMA home-cleaning appliances online with delivery across Bangladesh.

Frequently Asked Questions

1. What is the suction power of the DEERMA CM800?

The DEERMA CM800 has a maximum vacuum specification of at least 13kPa, providing strong suction for dust and debris from suitable fabric surfaces.

2. Does the DEERMA CM800 use UV-C light?

Yes. The CM800 uses a 253.7nm UV-C lamp as part of its specialized dust-mite removal system. Its pressure-sensitive safety feature is designed to switch the UV light off when the device is lifted from the surface.

3. How hot is the warm air from the CM800?

The warm-air function provides approximately 50°C constant-temperature air, which helps reduce dampness in suitable bedding and fabric surfaces.

4. How fast does the CM800 beating function operate?

DEERMA’s official product information specifies a beating frequency of 7,000 beats per minute.

5. Does the DEERMA CM800 have a HEPA filter?

Yes. The CM800 uses a filtration system combining spiral-wind separation and HEPA filtration to help capture fine particles during cleaning.

6. What surfaces can the DEERMA CM800 clean?

The CM800 is designed primarily for mattresses, bedding, pillows, sofas, blankets, and other suitable upholstered or fabric surfaces.

7. Is the DEERMA CM800 cordless?

No. The CM800 is a corded electric appliance. The product manual specifies a 220–240V power supply, and DEERMA’s specifications include a power cord.

8. What is the delivery time from AIYOZON?

Inside Dhaka: 24–48 Hours
Outside Dhaka: 2–3 Business Days

Get Your DEERMA CM800 Dust Mite Removal Vacuum Cleaner from AIYOZON

Give your mattresses, bedding, sofas, pillows, and other suitable fabric surfaces more focused cleaning with the DEERMA CM800 Dust Mite Removal Vacuum Cleaner. Its 13kPa suction, 253.7nm UV-C light, 50°C warm air, 7,000 beats-per-minute vibration, HEPA filtration, and ergonomic design combine multiple cleaning functions in one specialized appliance.

Whether you want to maintain your mattress, refresh upholstered furniture, remove embedded dust, or reduce dampness in suitable bedding, the DEERMA CM800 provides a dedicated solution for fabric-focused household cleaning.

Shop the DEERMA CM800 Dust Mite Removal Vacuum Cleaner from AIYOZON today and upgrade your everyday bedding and upholstery cleaning routine.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “DEERMA CM800 Dust Mite Removal Vacuum Cleaner – Powerful 13kPa Suction with UV-C, HEPA Filtration & 50°C Warm Air”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
***Shipping & Delivery Information – AIYOZON*** Welcome to AIYOZON! We are committed to delivering your favorite products quickly, safely, and efficiently across Bangladesh. Please read our shipping and delivery policy below to understand how we handle your orders. 🚚 Delivery Coverage At AIYOZON, we proudly deliver all over Bangladesh, ensuring that customers from every region can enjoy a smooth shopping experience. We deliver to: All areas inside Dhaka City Major cities and districts outside Dhaka Remote areas (delivery time may vary slightly) ⏱️ Delivery Time We understand that fast delivery matters. That’s why we aim to process and ship your orders as quickly as possible. Estimated Delivery Timeline: Inside Dhaka: Same-day delivery (within a few hours after confirmation) Outside Dhaka: Delivery within 48 hours (2 days) ⚠️ Please note: Delivery time may vary slightly due to factors like weather conditions, traffic, or courier delays. 💰 Delivery Charges Our delivery charges are simple, transparent, and affordable. Charges Breakdown: Inside Dhaka: 70 BDT Outside Dhaka: 130 BDT There are no hidden fees—what you see is what you pay. 💳 Payment Policy To ensure secure and reliable transactions, we follow a structured payment system: Inside Dhaka: Cash on Delivery (COD) available You can pay upon receiving your product Outside Dhaka: Advance payment is required before processing the order This helps us avoid fake orders and ensures faster delivery 📦 Courier Partners To provide fast and reliable delivery, we work with trusted courier services: Pathao Steadfast These partners help us maintain delivery speed and product safety across the country. ⚠️ Important Notes Please keep the following points in mind for a smooth delivery experience: Orders are processed immediately after confirmation Make sure your contact number and address are accurate Delivery may be delayed due to: Natural conditions (rain, flood, etc.) Traffic or courier issues Public holidays or strikes Our team may contact you for order verification Failure to confirm or respond may result in order cancellation 💬 Need Help? If you have any questions regarding your shipment or delivery, feel free to contact our support team. We’re always here to help! Thank you for choosing AIYOZON — where fast delivery meets trusted service. 🚀