Xiaomi Mijia Mite Remover 2 MJCMY02DY – 12000Pa UV Vacuum Cleaner with 50°C Hot Air
5,940.00৳
Xiaomi Mijia Mite Remover 2 MJCMY02DY – 12000Pa UV Vacuum Cleaner with 50°C Hot Air
Xiaomi Mijia Mite Remover 2 MJCMY02DY is a dedicated fabric and bedding cleaning appliance designed to remove dust, dust mites, hair, skin particles and other fine debris from mattresses, pillows, sofas, blankets and similar surfaces.
It combines high-frequency tapping, 12,000Pa suction, UV irradiation and 50°C hot-air drying in one compact device. The three-zone tapping mechanism helps loosen particles embedded in fabric before the powerful suction collects them.
With a 350W motor, approximately 1.63kg net weight, transparent dust cup and washable filter components, the Xiaomi Mijia Mite Remover 2 is designed to make regular mattress and bedding maintenance easier.
Common Problems with Mattresses & Bedding
Mattresses and upholstered furniture can accumulate invisible contaminants over time, including:
- Dust and fine particles
- Dust mites
- Dead skin flakes
- Hair and fabric fibres
- Pet dander
- Fine allergens
- Moisture within fabric surfaces
A normal vacuum cleaner may remove surface dust, but a dedicated mite remover uses tapping + suction + UV irradiation + hot air to provide a more specialized cleaning process for fabric surfaces.
Smart Solution: Xiaomi Mijia Mite Remover 2
The Xiaomi Mijia Mite Remover 2 uses a four-stage cleaning approach:
High-frequency tapping → Powerful suction → UV irradiation → 50°C hot-air drying
The tapping mechanism helps loosen embedded dust and debris, while the suction system collects the loosened particles. UV irradiation and hot air are then used as additional hygiene and drying functions.
Key Features
1. Powerful 12000Pa Hurricane Suction
The Xiaomi Mijia Mite Remover 2 delivers up to 12,000Pa suction power, helping remove dust, hair, skin particles, mites and other fine debris from soft surfaces.
Its suction system is specifically suited to fabric surfaces such as mattresses, pillows, sofas and bedding rather than being designed as a general floor vacuum.
Note: Some third-party listings advertise 14,000Pa. Because multiple sources consistently specify 12,000Pa for MJCMY02DY, this description uses 12,000Pa as the primary specification.
2. 12,000 Beats Per Minute High-Frequency Tapping
The upgraded three-zone tapping system operates at up to 12,000 beats per minute.
The tapping action helps loosen dust, skin flakes and other particles embedded deeper within fabric, making them easier for the suction system to collect.
This is especially useful when cleaning mattresses, cushions and upholstered surfaces where particles can become trapped between fabric fibres.
3. UV Irradiation for Mite & Bacteria Treatment
The integrated UV system provides an additional hygiene-focused cleaning step.
Current product listings report 99% sterilization and 90% mite-removal efficiency under specified testing conditions. These figures are performance claims from product/testing materials and should not be interpreted as guaranteed results in every household environment.
Some sources identify the UV light as 254nm UV-C.
4. UV Safety Auto-Off
The device is designed with a UV safety mechanism that automatically switches the UV function off when the cleaning head is lifted away from the surface.
One product source specifies automatic UV shutoff when the cleaner is lifted more than approximately 5cm.
This feature helps reduce unnecessary UV exposure during operation.
5. 50°C Hot-Air Drying
The Xiaomi Mijia Mite Remover 2 produces approximately 50°C hot air during operation.
The warm airflow helps dry the cleaned fabric surface and reduce excess moisture, creating a less favourable environment for mites and bacteria.
This makes the hot-air function particularly useful in humid environments.
6. Multi-Stage Cyclone Filtration
The cleaner uses a cyclone-based filtration system designed to separate and capture fine dust and debris.
Available product specifications describe the upgraded filtration system as providing approximately 99% overall filtration efficiency, while other sources describe a four-stage filtration arrangement.
Because filtration-stage descriptions vary between regional listings, the safest specification is multi-stage cyclone filtration with washable filter components.
7. Transparent Visual Dust Cup
The transparent dust cup lets you see the dust and debris collected during cleaning.
A one-click release mechanism makes the dust cup easier to remove and empty.
This is useful because you can visually check how much dust has been removed from your mattress or sofa.
8. Lightweight 1.63kg Body
At approximately 1.63kg, the Xiaomi Mijia Mite Remover 2 is designed for relatively comfortable handheld use.
Its open-style handle helps provide a practical grip while cleaning larger surfaces such as mattresses and sofas.
9. LED Display
The product uses an LED display to provide operating information during use.
This gives the user a simple visual interface while cleaning.
Key Benefits
- Up to 12,000Pa suction
- 350W rated power
- 12,000 beats/min high-frequency tapping
- Three-zone synchronized tapping
- UV irradiation system
- Reported 99% sterilization under specified testing conditions
- Reported 90% mite removal under specified testing conditions
- Approximately 50°C hot-air drying
- Multi-stage cyclone filtration
- Washable filter components
- Transparent visual dust cup
- One-click dust cup removal
- Lightweight 1.63kg body
- LED display
- Designed for mattresses, bedding and upholstered surfaces
Perfect For
The Xiaomi Mijia Mite Remover 2 is suitable for cleaning:
- Mattresses
- Pillows
- Bedsheets
- Blankets
- Duvets
- Sofas
- Cushions
- Fabric chairs
- Upholstered furniture
- Carpets and compatible fabric surfaces
- Plush or baby products where appropriate
The product is primarily designed for dry fabric cleaning, rather than general floor vacuuming or liquid cleaning.
Why Choose Xiaomi Mijia Mite Remover 2?
The biggest advantage of the Xiaomi Mijia Mite Remover 2 is that it combines several fabric-cleaning technologies in a single device.
Instead of relying only on suction, it first uses high-frequency tapping to loosen embedded particles, then uses suction to collect them. UV irradiation provides an additional hygiene function, while 50°C hot air helps with drying.
This makes it a more specialized choice for mattress and bedding maintenance than a conventional household vacuum cleaner.
Xiaomi Mijia Mite Remover 2 vs Regular Vacuum Cleaner
| Feature | Xiaomi Mijia Mite Remover 2 | Regular Vacuum Cleaner |
|---|---|---|
| Primary purpose | Mattress & fabric cleaning | General household cleaning |
| Suction | Up to 12,000Pa | Varies by model |
| High-frequency tapping | Yes, 12,000 beats/min | Usually unavailable |
| UV treatment | Yes | Usually unavailable |
| Hot-air drying | Yes, 50°C | Usually unavailable |
| Mattress-focused design | Yes | Not usually |
| Visual dust cup | Yes | Model dependent |
| Washable filter | Yes | Model dependent |
| Weight | Approx. 1.63kg | Varies |
| Floor cleaning | Not its primary purpose | Usually designed for this |
How to Use Xiaomi Mijia Mite Remover 2
Step 1: Prepare the Surface
Remove large objects, loose items and visible debris from the mattress, sofa, pillow or other fabric surface.
Step 2: Connect the Power
The MJCMY02DY is a corded electric appliance, so connect it to a suitable power outlet before operation.
Step 3: Place the Cleaner on the Fabric
Place the cleaning head firmly against the fabric surface.
Proper contact is important because the UV function is designed to operate when the cleaning head is positioned correctly against the surface.
Step 4: Move Slowly Across the Surface
Move the cleaner slowly over the mattress, sofa or other compatible fabric.
Slow and controlled movement allows the tapping, suction, UV and hot-air functions to work across the cleaning area.
Step 5: Focus on Frequently Used Areas
Spend additional time on:
- Pillow areas
- Sleeping areas
- Mattress centre
- Mattress edges
- Sofa seating areas
- Frequently used cushions
Step 6: Empty the Dust Cup
After cleaning, remove the transparent dust cup and dispose of the collected debris.
Step 7: Clean the Filter
Clean the washable filter components according to the manufacturer’s instructions and allow them to dry completely before reinstalling.
Recommended Use Cases
Mattress Cleaning
Use the Xiaomi Mijia Mite Remover 2 regularly on mattresses to collect dust, hair, skin flakes and other fine debris.
Pillow & Bedding Cleaning
The compact design makes it practical for cleaning pillows, blankets and other bedding surfaces.
Sofa Cleaning
Use it on compatible fabric sofas and cushions to remove accumulated dust and fine particles.
Humid-Weather Bedding Maintenance
The 50°C hot-air function can help dry fabric surfaces after cleaning, making it particularly useful in humid conditions.
Cleaning & Maintenance
For consistent performance:
- Empty the dust cup regularly.
- Check the suction opening for blockages.
- Clean the filter components periodically.
- Wash washable filters only as recommended.
- Allow filters to dry completely before installation.
- Check the UV lamp area for dust accumulation.
- Keep the tapping mechanism free of foreign objects.
- Replace the filter according to the manufacturer’s maintenance recommendation.
Some product listings recommend replacing the filter approximately every 2–3 months, depending on usage.
Important Usage Tips
- Use the device primarily on dry fabric surfaces.
- Do not use it to vacuum liquids.
- Do not use it as a replacement for regular washing and drying of bedding.
- Do not deliberately look directly at the UV light.
- Keep the cleaning head properly positioned on the surface during UV operation.
- Do not block the air inlet or outlet.
- Clean the filter regularly.
- Completely dry washable filter components before reinstalling.
- Unplug the appliance before cleaning or performing maintenance.
The product is designed as a specialized fabric cleaner and should not be treated as a general wet/dry vacuum.
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Xiaomi Mijia Mite Remover 2 |
| Model | MJCMY02DY |
| Product Type | UV Dust Mite / Mattress Vacuum Cleaner |
| Color | White |
| Rated Power | 350W |
| Suction Power | Up to 12,000Pa |
| High-Frequency Tapping | Up to 12,000 beats/min |
| UV Function | UV irradiation / UV-C |
| UV Wavelength | 254nm reported by product sources |
| Sterilization Claim | Up to 99%* |
| Mite Removal Claim | Up to 90%* |
| Hot-Air Temperature | Approx. 50°C |
| Filtration | Multi-stage cyclone filtration |
| Filter | Washable filter components |
| Dust Cup | Transparent / visual |
| Noise Level | ≤78dB(A) |
| Rated Voltage | 220–240V~ / regional variation |
| Rated Frequency | 50–60Hz |
| Net Weight | Approx. 1.63kg |
| Dimensions | Approx. 239 × 230.5 × 144mm |
| Power Source | Corded electric |
| Cleaning Type | Dry fabric cleaning |
The model, 350W power, 12,000Pa suction, 12,000 beats/min, 50°C hot air, 78dB(A) noise level, 1.63kg weight and dimensions are consistently reported across multiple product sources.
*Sterilization and mite-removal percentages are reported performance claims under specified test conditions and should not be treated as guaranteed household results.
What’s in the Box?
Package contents can vary by market, seller and regional version. Commonly listed contents include:
- Xiaomi Mijia Mite Remover 2 ×1
- Power cable / cord
- User manual
- Regional packaging and documentation
One current product listing specifically identifies the package as the anti-mite vacuum cleaner with a CN plug and CN user manual.
Who Should Buy This Product?
The Xiaomi Mijia Mite Remover 2 is a good choice for people who:
- Want a dedicated mattress vacuum cleaner
- Regularly clean bedding and pillows
- Want targeted dust-mite cleaning
- Need a compact fabric-cleaning appliance
- Want UV treatment as part of their cleaning routine
- Prefer a transparent dust cup
- Want hot-air drying
- Need a lightweight handheld design
- Live in a humid environment
- Want an alternative to using a standard vacuum on mattresses
Why Buy from AIYOZON?
When purchasing the Xiaomi Mijia Mite Remover 2 MJCMY02DY from AIYOZON, you can enjoy:
- Detailed and transparent product information
- Product-focused shopping experience
- Easy online ordering
- Customer support
- Convenient delivery options
- Reliable after-sales assistance
- A dedicated selection of Xiaomi and smart home products
Frequently Asked Questions
What is the suction power of Xiaomi Mijia Mite Remover 2?
The commonly specified suction power is 12,000Pa. Some third-party listings advertise 14,000Pa, but 12,000Pa is the more consistently supported specification for MJCMY02DY.
What is the model number?
The model number is MJCMY02DY.
How many times per minute does it tap the fabric?
The high-frequency tapping system operates at up to 12,000 beats per minute.
Does Xiaomi Mijia Mite Remover 2 have UV?
Yes. It features an integrated UV irradiation system designed as part of its dust-mite and hygiene treatment. Some product sources identify the UV wavelength as 254nm.
Does it remove dust mites?
The product is specifically designed for dust-mite removal. Current product materials report up to 90% mite removal under specified testing conditions.
Does it have hot air?
Yes. The device provides approximately 50°C hot air to help dry bedding and fabric surfaces after or during cleaning.
Is Xiaomi Mijia Mite Remover 2 cordless?
No. The MJCMY02DY is a corded electric appliance and does not operate as a cordless battery vacuum.
How much does it weigh?
The net weight is approximately 1.63kg.
What surfaces can I clean with it?
It is designed primarily for mattresses, bedding, pillows, sofas, cushions and other compatible dry fabric surfaces.
Can I use it on the floor?
It is not primarily designed as a floor vacuum cleaner. Its tapping and suction head is optimized for fabric surfaces such as mattresses and upholstery.
Is the filter washable?
Yes. Product listings describe washable filter components. Always allow the filter to dry completely before reinstalling it.
Does it collect dust in a visible container?
Yes. It has a transparent visual dust cup that allows you to see collected dust and debris.
Final Verdict
The Xiaomi Mijia Mite Remover 2 MJCMY02DY is a specialized fabric-cleaning appliance built around four core technologies: high-frequency tapping, powerful suction, UV irradiation and 50°C hot-air drying.
With 12,000Pa suction, 12,000 beats/min tapping, 350W rated power, a transparent dust cup, washable filtration and a lightweight 1.63kg body, it is well suited for regular cleaning of mattresses, pillows, bedding, sofas and other fabric surfaces.
For anyone searching for a Xiaomi dust mite vacuum cleaner with UV and hot-air drying, the MJCMY02DY offers a practical all-in-one solution for maintaining cleaner and drier fabric surfaces.
🛒 Upgrade Your Mattress Cleaning Routine
- Deep-clean mattresses and bedding
- Remove dust, hair and fine particles
- Loosen embedded debris with 12,000 beats/min tapping
- Use 12,000Pa suction for deep fabric cleaning
- Apply UV irradiation as an additional hygiene step
- Dry surfaces with approximately 50°C hot air
Reviews
There are no reviews yet.