Xiaomi Lofans CS-622 Rechargeable Fabric Lint Remover Machine – 7000RPM Fabric Shaver

The Xiaomi Lofans CS-622 Rechargeable Fabric Lint Remover Machine is a compact electric fabric shaver designed to remove lint balls, fuzz and fabric pilling from clothing and other suitable textile surfaces.

The CS-622 combines a 7000RPM motor, negative-pressure centrifugal fan system and stainless-steel cutting blades to lift and trim unwanted fabric fibres efficiently. Its large approximately 60mm honeycomb mesh surface helps cover a practical area while the collected lint is directed into a removable collection compartment.

With a built-in 450mAh rechargeable battery, Type-C charging and approximately 40 minutes of operating time, the compact CS-622 is convenient for home use, travel, business trips and quick clothing maintenance.

Common Problems with Clothes and Fabric

Over time, frequently worn clothing can develop unwanted fabric pilling and fuzz.

Common problems include:

• Small lint balls appearing on sweaters
• Fuzz accumulating on wool garments
• Pilling on scarves and coats
• Clothes looking older than they actually are
• Fabric fibres becoming uneven
• Manual lint removal taking too much time
• Large fabric shavers being inconvenient to carry

A dedicated electric lint remover can make routine clothing maintenance much easier.

Smart Solution for Fabric Pilling

The Lofans CS-622 combines fast cutting, suction and a large mesh surface in a compact rechargeable design.

How it works:

Fabric Surface → Mesh Guides Lint → Suction Pulls Fibres In → Stainless-Steel Blades Trim Pilling → Lint Collects in Container

The centrifugal fan system creates airflow that helps draw loose fibres toward the cutting area, while the stainless-steel blades trim the unwanted lint.

Key Features

1. Powerful 7000RPM Motor

The CS-622 uses a high-speed motor capable of approximately 7000 revolutions per minute.

The high rotational speed allows the cutting system to quickly process loose lint and fabric pills, helping restore a cleaner appearance to suitable garments.

2. Negative-Pressure Centrifugal Fan

The device incorporates an 8-blade negative-pressure centrifugal fan system.

This airflow helps pull lint and loose fabric fibres toward the cutting mechanism instead of allowing them to remain on the garment.

3. Sharp Stainless-Steel Blades

The CS-622 uses precision stainless-steel blades designed to trim unwanted fabric pills efficiently.

The cutting assembly works at high speed to remove accumulated fuzz while the protective mesh helps separate the fabric surface from the blades.

4. Approximately 60mm Honeycomb Mesh

The large mesh surface is approximately 60mm in diameter according to current CS-622 listings.

The honeycomb-style opening is designed to capture lint balls of different sizes while allowing the cutting mechanism to work across the fabric surface.

5. Three Mesh Sizes

Current CS-622 product descriptions identify three types of mesh openings designed to handle different lint and pilling sizes.

This helps the fabric shaver work across different types of clothing and textile surfaces.

6. Rechargeable 450mAh Battery

The CS-622 includes a built-in rechargeable battery with a commonly listed capacity of approximately 450mAh.

The battery allows cordless operation, making the device convenient when you need to remove lint without keeping it connected to a power source.

7. Type-C Charging

The CS-622 uses a Type-C charging interface according to current product listings.

The commonly listed charging voltage is 5V, with a full charging time of approximately 2 hours on the better-supported retailer specifications.

8. Up to 40-Minute Runtime

A full charge provides approximately 40 minutes of operating time according to multiple CS-622 listings.

This makes the device suitable for cleaning several garments during one session.

9. One-Button Operation

The compact design uses a simple control button, making the CS-622 easy to start and stop.

An indicator light provides basic operating/charging feedback on the device.

10. Removable Lint Collection Container

The CS-622 includes a removable lint collection compartment with a commonly listed capacity of approximately 55mL.

The transparent collection area allows users to see accumulated lint and empty the container when necessary.

11. Compact & Lightweight Design

The CS-622 measures approximately 77 × 77 × 67mm and weighs around 125g.

Its compact body can easily fit into a luggage bag, backpack, drawer or wardrobe, making it convenient for travel and everyday use.

12. Suitable for Different Fabrics

Current CS-622 listings describe the machine as suitable for fabrics such as:

• Sweaters
• Wool garments
• Coats
• Scarves
• Knitted clothing
• Synthetic fabrics
• Other suitable pilling-prone textiles

Always test the device on a small inconspicuous area first, particularly with delicate fabrics.

Benefits

• Removes visible fabric pilling
• Helps refresh old-looking clothing
• 7000RPM high-speed motor
• Stainless-steel cutting blades
• Negative-pressure centrifugal fan
• Approximately 60mm large mesh surface
• Three mesh sizes
• Rechargeable 450mAh battery
• Approximately 40-minute runtime
• Type-C charging
• One-button operation
• Removable lint collection compartment
• Compact and lightweight
• Convenient for home and travel
• Suitable for sweaters, coats, scarves and knitwear

Perfect For

The Xiaomi Lofans CS-622 Fabric Lint Remover is suitable for:

Sweaters

Remove unwanted fuzz and pilling from suitable knitted sweaters.

Wool Coats

Help refresh the appearance of compatible wool-blend and wool garments.

Scarves

Remove accumulated fabric pills from suitable scarves and winter accessories.

Knitwear

Maintain the appearance of knitted clothing that develops pilling through regular use.

Trousers

The fabric shaver can be used on suitable trousers and other pilling-prone garments.

Home Textiles

Suitable listings also identify applications such as dolls, bedding and cushions, provided the material is compatible with the machine.

Why Choose Xiaomi Lofans CS-622?

The CS-622 focuses on portability and simple everyday fabric maintenance.

Instead of manually pulling lint balls from clothing, the high-speed cutting system can trim unwanted fibres while the centrifugal fan helps collect them inside the device.

Its small 125g body, rechargeable battery and Type-C charging make it particularly convenient for wardrobes, travel bags and quick clothing touch-ups.

Xiaomi Lofans CS-622 vs Manual Lint Removal

How to Use Xiaomi Lofans CS-622

Step 1: Charge the Machine

Connect the CS-622 to a suitable 5V USB power source using the Type-C charging connection.

Allow the machine to charge fully before extended use. Current listings commonly specify approximately 2 hours for a full charge.

Step 2: Prepare the Garment

Place the clothing on a flat, stable surface.

Smooth the fabric before operating the machine.

Step 3: Turn On the Lint Remover

Press the power button to start the motor and cutting system.

Step 4: Move Gently Across the Fabric

Place the mesh surface gently against the garment and move the machine slowly across areas affected by pilling.

Avoid pressing excessively hard.

Step 5: Check the Fabric

After several passes, inspect the cleaned area and continue only where necessary.

Step 6: Empty the Lint Container

Turn off the machine and remove the collection compartment when it becomes full.

Dispose of the collected lint and clean the compartment.

Step 7: Clean the Machine

Use the supplied cleaning brush to remove lint and fibres from the machine after use.

Use Cases

Sweater Maintenance

Regularly remove surface pilling from suitable sweaters to improve their appearance.

Winter Clothing

Use the CS-622 on compatible coats, scarves and other winter garments.

Travel

Its compact size and rechargeable design make it useful for business trips and holidays.

Wardrobe Maintenance

Keep frequently worn clothing looking cleaner without replacing garments simply because of surface pilling.

Bedding & Cushions

For suitable fabrics, the lint remover can also be used to remove surface fuzz and pills from bedding or cushions.

Cleaning & Maintenance

Regular cleaning helps maintain cutting and suction performance.

1. Turn off the device before cleaning.
2. Disconnect the charging cable.
3. Remove the lint collection compartment.
4. Empty collected fabric fibres.
5. Use the cleaning brush to remove remaining lint.
6. Keep the mesh surface free from heavy fibre buildup.
7. Store the machine in a dry location.
8. Do not immerse the electrical device in water.

Important Usage Tips

• Always test the machine on a small hidden section before treating an entire garment.
• Use gentle pressure on fabric.
• Keep the machine moving rather than holding it in one spot for too long.
• Do not use excessive force against delicate materials.
• Avoid unsuitable fabrics with loose decorative elements.
• Keep fingers away from the cutting area.
• Turn the machine off before cleaning or emptying the lint container.
• Do not operate the device while connected to a charger unless the manufacturer’s instructions specifically allow it.
• Keep the machine dry.

Fabrics to Avoid

Current Xiaomi lint-remover guidance for the newer official Xiaomi model specifically warns against down jackets, lace, garments with many decorative studs/accessories and pile longer than 5mm. Because CS-622 is a different Lofans model, use the CS-622 manual/seller guidance where available and test delicate garments first.

Product Specifications

The CS-622 specifications are based on multiple current product listings. Retailer sources consistently support the 3W rating, 3.7V operating voltage, 450mAh battery, 7000RPM motor, 40-minute runtime, 77 × 77 × 67mm dimensions and approximately 125g weight.

What’s in the Box?

Typical CS-622 packages may include:

• 1 × Lofans CS-622 Fabric Lint Remover
• 1 × USB Type-C Charging Cable
• 1 × Cleaning Brush
• 1 × User Manual

Some sellers also list an additional replacement blade in the package. Package contents can vary by market and seller, so verify the exact box contents before ordering.

Who Should Buy This Product?

The Xiaomi Lofans CS-622 is suitable for customers who:

• Regularly wear sweaters or knitwear
• Want to remove clothing pilling
• Need a compact fabric shaver
• Prefer rechargeable appliances
• Want a portable lint remover for travel
• Need an easy way to maintain winter clothing
• Want to refresh the appearance of older garments
• Prefer a lightweight one-button design

Why Buy from AIYOZON?

When purchasing the Xiaomi Lofans CS-622 Rechargeable Fabric Lint Remover from AIYOZON, you can enjoy:

• Clear product specifications
• Convenient online ordering
• Carefully selected Xiaomi ecosystem products
• Product-focused customer support
• Convenient delivery
• Support with product-related questions

Frequently Asked Questions

What is the Xiaomi Lofans CS-622?

The CS-622 is a compact rechargeable electric fabric lint remover designed to cut and collect fabric pills, fuzz and loose fibres from suitable clothing and textiles.

What is the motor speed?

The motor can reach approximately 7000RPM according to current CS-622 product specifications.

How long does the battery last?

The built-in approximately 450mAh battery provides up to around 40 minutes of operating time per charge according to multiple listings.

How long does it take to charge?

Current CS-622 listings commonly specify approximately 2 hours for a full charge.

Does the CS-622 use Type-C charging?

Yes. Current product listings identify USB Type-C as the charging interface.

What fabrics can I use it on?

It is commonly marketed for sweaters, wool garments, coats, scarves, knitwear and other suitable fabrics that develop pilling. Always test delicate fabrics first.

Does it have a lint collection container?

Yes. The CS-622 has a removable lint collection compartment, commonly listed at approximately 55mL.

Is the CS-622 portable?

Yes. At approximately 125g and 77 × 77 × 67mm, it is compact enough for drawers, bags and travel luggage.

Does it have stainless-steel blades?

Yes. The cutting system uses stainless-steel blades designed to trim unwanted fabric pills.

Is the Xiaomi Lofans CS-622 rechargeable?

Yes. It has a built-in rechargeable battery and USB Type-C charging.

Is this the same as the newer Xiaomi Lint Remover?

No. The Lofans CS-622 is a different model. Xiaomi’s current official Xiaomi Lint Remover has different dimensions, battery capacity and operating specifications. The current official model is listed at 145 × 62 × 65mm with a 1300mAh battery and up to 180 minutes of runtime, so those specifications should not be applied to the CS-622.

Final Verdict

The Xiaomi Lofans CS-622 Rechargeable Fabric Lint Remover Machine is a compact and convenient solution for removing unwanted lint, fuzz and fabric pilling from suitable clothing.

With its 7000RPM motor, negative-pressure centrifugal fan, stainless-steel blades, approximately 60mm mesh surface, 450mAh rechargeable battery, Type-C charging and up to 40-minute runtime, it provides a practical way to refresh sweaters, coats, scarves, knitwear and other suitable fabrics.

Its lightweight 125g body and compact dimensions also make it convenient for home storage and travel.

Refresh Your Clothes & Remove Fabric Pilling

• ✂️ 7000RPM High-Speed Motor
• 🧶 Effective Lint & Pilling Removal
• 🌀 8-Blade Negative-Pressure Fan
• 🔪 Stainless-Steel Cutting Blades
• 🔋 450mAh Rechargeable Battery
• 🔌 USB Type-C Charging
• ⏱️ Up to 40-Minute Runtime
• 🧹 55mL Removable Lint Container
• 📏 Approx. 60mm Mesh Surface
• 🧳 Compact & Lightweight 125g Design

👉 Order the Xiaomi Lofans CS-622 Rechargeable Fabric Lint Remover from AIYOZON today and give your clothes a cleaner, fresher appearance.