Xiaomi Mijia Automatic Soap Dispenser Pro

Rechargeable, Touchless & 0.25s Rapid Foaming

Upgrade your everyday hand-washing routine with the Xiaomi Mijia Automatic Soap Dispenser Pro. Also identified as MJXSJ04XW, this rechargeable automatic foaming dispenser uses an infrared sensor to detect your hand and dispense foam without requiring physical contact. Available product documentation lists a built-in 1400mAh battery, Type-C charging and IPX5 water resistance.

The dispenser is designed for bathrooms, kitchens, offices and other hand-washing areas where convenient, touchless soap dispensing is useful.

Common Problems with Traditional Soap Dispensers

Traditional manual soap pumps can create several everyday inconveniences.

• ❌ Requires physical contact
• 🦠 Frequent touching can reduce hygiene
• 💧 Soap can accumulate around the pump
• 🖐️ Manual pumping can be inconvenient
• 🔋 Disposable batteries may need frequent replacement
• 🧴 Liquid soap can be messy to dispense

Smart Solution: Xiaomi Mijia Automatic Soap Dispenser Pro

The Xiaomi Mijia Automatic Soap Dispenser Pro uses an infrared sensing system to automatically detect your hand.

Simply place your hand underneath the nozzle, and the dispenser produces foam automatically. The Pro model is rechargeable, eliminating the need for regular disposable battery replacement.

Key Features

🖐️ Touchless Infrared Sensor

The built-in infrared sensor detects your hand automatically.

You don’t need to press a mechanical pump or touch the dispenser with wet or dirty hands. The listed sensing distance is approximately 60–90mm.

⚡ 0.25-Second Rapid Foaming

The Xiaomi Mijia Pro is designed to produce foam in approximately 0.25 seconds after detecting your hand.

This quick response makes it convenient for busy bathrooms, kitchens and family households.

☁️ Dense Foam Technology

The dispenser creates rich foam rather than simply releasing liquid soap.

The foam-generation system is designed to mix air and liquid efficiently, helping create a soft, dense lather for comfortable hand washing.

🔋 Built-In 1400mAh Rechargeable Battery

Unlike the standard MJXSJ03XW version, the Pro uses a built-in 1400mAh rechargeable battery.

This means you don’t have to keep buying and replacing AA batteries. A full charge is advertised to provide approximately six months of use under specified usage conditions.

🔌 Convenient Type-C Charging

The Xiaomi Mijia Automatic Soap Dispenser Pro supports USB Type-C charging.

The listed charging specification is 5V/1A, making it convenient to recharge using a compatible USB power adapter.

💦 IPX5 Water Resistance

The Pro model is listed with an IPX5 water-resistance rating, making it suitable for environments where occasional water splashes may occur.

However, water resistance does not mean the dispenser should be submerged or continuously rinsed under running water.

⏱️ 20-Second Hand-Washing Reminder

The dispenser includes a 20-second lather reminder designed to encourage users to spend enough time rubbing their hands during washing.

This can be particularly useful for families and children who are learning better hand-washing habits.

🔄 Easy Soap Bottle Replacement

The soap container is designed for convenient replacement. Available documentation describes twisting the upper dispenser section to detach it from the liquid reservoir.

Benefits You’ll Enjoy

✔️ Touchless automatic operation

✔️ Approximately 0.25-second rapid foaming

✔️ Built-in 1400mAh rechargeable battery

✔️ Type-C charging

✔️ Up to approximately six months of battery life under specified conditions

✔️ 60–90mm sensing distance

✔️ Rich and dense foam

✔️ 20-second lather reminder

✔️ IPX5 water resistance

✔️ Modern minimalist design

✔️ Suitable for bathrooms and kitchens

Perfect For

• 🚿 Bathrooms — Convenient touchless hand washing.
• 🍳 Kitchens — Dispense soap without touching the pump.
• 👨‍👩‍👧‍👦 Families — Easy automatic operation for everyday use.
• 👶 Children — Simple sensor operation makes hand washing easier.
• 🏢 Offices — A practical and modern hand-washing solution.
• 🏨 Guest Areas — Adds convenience and a clean appearance.
• 🎁 Gift Buyers — A useful smart-home accessory.

Why Choose Xiaomi Mijia Automatic Soap Dispenser Pro?

The main advantage of the Xiaomi Mijia Automatic Soap Dispenser Pro is the combination of touchless operation and rechargeable convenience.

The infrared sensor eliminates the need to physically touch the dispenser, while the built-in battery means you can recharge the device instead of replacing disposable batteries.

Its IPX5 protection and compact design also make it well suited to humid bathroom and kitchen environments.

Xiaomi Mijia Pro vs Standard Automatic Soap Dispenser

*Actual battery life depends on usage. The six-month figure is based on specified test/use conditions.

How the Touchless Foam Dispenser Works

Step 1: Place Your Hand

Position your hand below the foam outlet within the sensor’s detection range.

Step 2: Sensor Detects Your Hand

The infrared sensor automatically detects your hand without physical contact.

Step 3: Foam Is Dispensed

The dispenser rapidly produces and releases foam, with available product information specifying approximately 0.25 seconds for foaming.

Step 4: Rub Your Hands

Spread the foam across both hands and rub thoroughly.

Step 5: Follow the 20-Second Reminder

Use the indicator reminder to continue rubbing your hands for approximately 20 seconds.

Step 6: Rinse

Rinse your hands thoroughly with clean water.

Easy Type-C Charging

The rechargeable battery makes daily operation simple.

Step 1: Check the Charging Port

Make sure the Type-C charging area is clean and dry.

Step 2: Connect the Cable

Connect a compatible Type-C cable to the dispenser.

Step 3: Charge the Battery

Use a suitable 5V charging source.

Step 4: Disconnect After Charging

Once charging is complete, disconnect the cable and keep the charging area dry.

Easy Soap Refilling

The Pro is designed for convenient soap-container replacement.

Step 1: Turn Off the Dispenser

Switch the device off before handling the soap container.

Step 2: Remove the Upper Section

Twist the dispenser section as instructed to separate it from the reservoir.

Step 3: Fill With Compatible Foam Soap

Use a suitable foaming hand soap or compatible foaming hand sanitizer.

Step 4: Reattach the Dispenser

Secure the upper section properly.

Step 5: Turn It On

Activate the dispenser and test the sensor.

Important Usage Tips

Use a suitable foaming hand soap or compatible foaming hand sanitizer. Incorrect liquid consistency may cause poor or inconsistent foaming.

Keep the infrared sensor clean and unobstructed.

Do not submerge the dispenser in water.

Despite the IPX5 rating, do not rinse the entire unit directly under running water. Xiaomi’s related automatic dispenser guidance recommends wiping the device with a damp cloth instead.

Keep the charging port dry before charging.

Place the dispenser on a stable, flat surface.

Product Specifications

Specifications are based on available Pro/MJXSJ04XW documentation and retailer listings; package and regional specifications can vary.

What’s in the Box?

A typical Pro package includes:

• Xiaomi Mijia Automatic Soap Dispenser Pro × 1
• Soap/liquid reservoir × 1
• Type-C charging cable × 1
• User manual × 1

Hand soap/sanitizer may not be included, depending on the seller and region.

Why Buy from AIYOZON?

AIYOZON provides a convenient online shopping destination for customers looking for smart home appliances, gadgets and lifestyle products in Bangladesh.

The Xiaomi Mijia Automatic Soap Dispenser Pro is an excellent choice for customers who want a rechargeable, touchless and easy-to-use soap dispenser for their home, kitchen, bathroom or office.

• ✅ Quality Products
• 🚚 Fast Delivery Across Bangladesh
• 📦 Secure Packaging
• 💬 Responsive Customer Support
• ⭐ Convenient Online Shopping
• 💯 Great Value for Money

Frequently Asked Questions

Q1. Is the Xiaomi Mijia Automatic Soap Dispenser Pro touchless?

Yes. It uses an infrared sensor to detect your hand and automatically dispense foam.

Q2. How quickly does it produce foam?

Available specifications indicate approximately 0.25 seconds for foam production.

Q3. Is the battery rechargeable?

Yes. The Pro model has a built-in 1400mAh rechargeable battery.

Q4. Does it support Type-C charging?

Yes. It uses USB Type-C charging with a listed 5V/1A charging specification.

Q5. How long can the battery last?

The Pro is advertised to operate for up to approximately six months on one charge under specified usage conditions. Actual battery life varies.

Q6. What is the sensor distance?

The listed sensing distance is approximately 60–90mm.

Q7. Is it waterproof?

It has an IPX5 water-resistance rating, which provides protection against water splashes. It should not be submerged or rinsed directly under running water.

Q8. Can I use regular liquid soap?

For reliable operation, use foaming-type soap or compatible foaming hand sanitizer. Incorrect liquid consistency can result in weak or inconsistent foam.

Q9. Does it have a hand-washing reminder?

Yes. It includes a 20-second lather reminder to encourage thorough hand washing.

Q10. Is soap included?

Not necessarily. Available Xiaomi documentation states that hand soap is not included with the dispenser, although package contents can vary by seller/region.

Upgrade Your Everyday Hand-Washing Experience

The Xiaomi Mijia Automatic Soap Dispenser Pro combines touchless infrared sensing, approximately 0.25-second rapid foaming, a 1400mAh rechargeable battery, Type-C charging, IPX5 protection and a 20-second lather reminder in a compact modern design.

For anyone looking for a rechargeable automatic foam dispenser for the bathroom, kitchen or office, the Pro model offers a convenient alternative to traditional manual soap pumps.

Order the Xiaomi Mijia Automatic Soap Dispenser Pro from AIYOZON today and enjoy a smarter, cleaner and more convenient hand-washing experience!